Switching Source Signals; Adjusting The Volume - HANNspree WT04-12A1 User Manual

Switching Source Signals

Press the
SOURCE
remote control or the
the control panel to select the
incoming source signal.
The current source setting CH xx
appears on the top left corner of
the screen, AV1 or AV2 appears
on the bottom right corner of the
screen.
Note:
The TV supports S-Video input in addition to normal video and audio sig-
nals. The TV detects the signal type automatically and gives priority to S-
video when two signals are detected at the same time. This auto detection
function is only available for AV2.

Adjusting the Volume

Press the
VOL UP button
the volume. Press
decrease the volume. The volume
level is displayed on the TV.
Press the
MUTE
remote control to turn the sound off.
The word "Mute" appears on the top
left corner of the screen and sound is
temporarily turned off.
Press the
MUTE
remote control or press
ton or VOL DOWN button
the original volume.
button on the
button on
TV
to increase
to
VOL DOWN
button on the
button on the
VOL UP but-
to restore
Current source setting
CH 40
TV
Mute
M
AV
TV/AV
M
down
Volume
Volume up
27