Operating The Tm2 And Tm3 Tuner; Am Or Fm Band Selection; Manual Tuning; Preset Tuning - McIntosh MA6700 Owner's Manual

Operating the TM2 and TM3 Tuner

When the MA6700 has an optional McIntosh Tuner
Module installed, the module provides the ability
to receive and listen to AM and FM Radio Stations.
The MAC6700 comes with a McIntosh Tuner Module
installed from the factory. The instructions that follow
are for operating the tuner fuctions of the installed
McIntosh Tuner Module in the MA/MAC6700.
If an external McIntosh Tuner Component is con-
nected to either the MA6700 or MAC6700 please refer
to the Owner's Manual supplied with the tuner com-
ponent for Radio Station reception.
The Front Panel Control labeled VOLUME/TUNE
serves a dual operational function together with the
Front Panel Display. When the display indicates
"SOURCE: TUNER _ _, 0-100%" the Front Panel
VOLUME/TUNE Control will adjust the listening
volume level as it is rotated. Refer to figures TM2
and TM3. If the Front Panel Display is indicating a
radio station frequency such as illustrated in figures
TM4 and TM5, the VOLUME/TUNE Control allows
SOURCE: TUNER FM
SOURCE: TUNER AM
91.5 MHz
1290 kHz
91.5 MHz
91.5 MHz ST |||
Figure TM1
15%
Figure TM2
15%
Figure TM3
ST |||
Figure TM4
|||
Figure TM5
ST |
Figure TM6
How to Operate the MA/MAC6700, con't
for tuning in a radio station
(Manual Tuning, Seek Tuning or
Preset Tuning). By momentarily
pushing in on the VOLUME/
TUNE Control and then rotating
it, the listening level will change
or the radio station tuned to will
change.

AM or FM Band Selection

Rotate the MA/MAC6700 Front
Panel INPUT Control to select
either TUNER FM or TUNER
AM. The AM or FM Push-
buttons on the Remote Control
may also be used to select the
desired broadcast band. Refer
to figures TM1, TM2, TM3 and
TM7. Several seconds after the
AM or FM Band is selected the
Front Panel Display will change
to indicate the frequency and
signal strength of the station the
tuner is currently tuned to. Refer
to figures TM4 and TM5.

Manual Tuning

The default Tuning Mode for the
MA/MAC6700 is STATIONS
(Manual Tuning). After having
selected the FM or AM Broad-
cast Band, push the VOLUME/
TUNE Control then rotate the Control clockwise or
counterclockwise to find the desired radio station.
Refer to figures TM1 and TM4. The Remote Control
may also be used for manual tuning of stations by
Figure TM7
39