Paging Feature - First Alert FA162C User Manual

If the paging feature has been programmed for your system, a pager will respond to certain conditions as they
occur in your system by displaying a 10-digit code that will indicate the type of condition that has occurred. The
10-digit code will use the following format:
SSSS will be your particular 4-digit subscriber No. (this same number will always appear at the beginning of the
display on your pager).
EEE will be a 3-digit number that describes the event that has occurred in your system (see explanation below).
NNN will be a 3-digit User or a zone number, depending on the type of event that has occurred.
The 3-digit Event Codes (EEE) that can be displayed are:
911 = Alarm (NNN that follows this code will be the zone number that has caused the alarm)
001 = Open, System disarmed (NNN that follows this code will be the User number)
002 = Close, System armed (NNN that follows this code will be the User number)
811 = Trouble (NNN that follows this code will be the zone number that has caused the trouble)
Example 1. Pager displays:
This indicates that your system (Subscriber No. 1234) is reporting an Alarm (911), due to zone 4 (004) being
faulted.
Example 2. Pager displays:
This indicates that your system (Subscriber No. 1234) is reporting an open/disarming (001) by User 5 (005).

PAGING FEATURE

SSSS–EEE–NNN
1 2 34 – 9 1 1 – 0 0 4
1 2 34 – 0 0 1 – 0 0 5
– 26 –