Table of Contents
Advertisement
OPERATION
To start playback form the first track
Press
button.
PLAY
To stop playback
Press
STOP
button.
To eject disc
Press
button to open the disc tray and take
OPEN/CLOSE
the disc off. Press the button again to close the tray.
Disc tray must be closed when the unit is not be used.
To pause playback
Press
button.
PAUSE
PAUSE indicator will light and playback is paused at the point
that the button is pressed. To restart playback, press
PAUSE
button again or press
To change time display
TIME
Press
button.
TIME
Each time
button is pressed, display will change in the
following order. "Track elapsed time" → "Track remaining time"
→ "Total remaining time" → "Track elapsed time".
• Track remaining time
(The remaining playing time from the playing point to the end
of the current track)
"–" is displayed
TRK
• Total remaining time
(The remaining playing time from the playing point to the end
of the last track)
"–" is displayed
TRK
* If
TIME
button is pressed when Super Audio CD disc that
supports text is in use, time display is given priority and the
text information will not be displayed afterward. To see the
text information, press
TEXT
■ Switching Sound Mode (Super Audio CD)
POWER
ON/OFF
SOUND MODE
SOUND MODE
12
button.
PLAY
"SING REMAIN"
is displayed
SING REMAIN
15 16 17 18 19 20
"TOTAL REMAIN"
is displayed
TOTAL
REMAIN
15 16 17 18 19 20
button.
PLAY
STOP
PAUSE
DISPLAY
OFF
/
/
OPEN/CLOSE
PHONES
LEVEL
TIME
TEXT
DISPLAY
-
+
Button
q Press
SOUND MODE
(not playing).
The currently selected layer or area is shown on the display
window. (CD or Super Audio CD)
SOUND MODE
If
button is pressed again, a playable layer
or area will be shown, and the layer or area will be switched
to new one.
* When layer or area is switched, TOC will be read again.
* If a CD disc or Super Audio CD disc with stereo area
only is loaded, sound mode cannot be changed.
* The sound mode on hybrid layer discs will be changed
in the following order.
Super Audio CD stereo area → CD layer → Super Audio
CD stereo area
* Sound mode can be selected while the tray is open.
Select a desired layer or area and press
then the tray will close and playback will be started.
q Press
SOUND MODE
The currently selected layer or area is shown on the display
window. (CD or Super Audio CD)
SOUND MODE
If
button is pressed again, the playback
is stopped, and the layer or area will be switched to new
one.
When you want to listen at that area, press
button again. The playback will be started.
Start sound mode
When a Super Audio CD hybrid layer discs that has both a
Super Audio CD high sound quality stereo area and a CD
area information are to be played, this player makes it possible
to set the layer/area (Super Audio CD or CD) to be
preferentially played.
This setting can be made when the tray is closed and there is
no disc in the disc tray.
q Press
SOUND MODE
button on the player.
The currently selected layer/area is displayed.
If the Super Audio CD is selected : Super Audio CD
If the CD is selected
w Press the
SOUND MODE
area to be played first, and then leave the setting for at
least two seconds to register the setting for the start sound
mode.
Caution
* Even when discs are changed over or the power turned off,
the "start sound mode" setting is stored in the memory and
remains unchanged.
* At the time of shipment, the sound mode is set to Super
Audio CD.
button in stop mode
button
PLAY
button during playback.
PLAY
: CD
button again to display the layer/
Advertisement
Table of Contents
