Marantz PS2100 User Manual page 12

WHAT IS THE SYSTEM
CONTROL?
The remote control system can be used to control Marantz system
components equipped with REMOTE CONTROL (Bus) jacks and
SYSTEM (Bus) jacks, such as DR2100 and DV2100. An example
procedure for system operation is described below. Here, we take as
an example the connection of a DVD player (DV2100) to this receiver
(PS2100) through the REMOTE CONTROL jacks. (The numbers of
controls and buttons on the main unit are enclosed in
the remote control are enclosed in
Press the button A or z to turn the receiver power ON.
1.
2. All the components connected to the REMOTE CONTROL jacks
are turned ON.
3. Press the DVD button twice to select DVD as a source and set the
remote control to DVD mode.
4. Press the "5" of the numeric button to select track number 5 of the
DVD.
5. Press the PLAY button (£) or the play button of the DV2100 to
play the DVD.
6. The DVD player (DV2100) starts to play the DVD.
Press the VOLUME buttons ⁄3 or turn the VOLUME control N to
7.
adjust the listening volume.
Press the STOP ⁄2 button to stop the DVD.
8.
Press the power button A or z to turn the power off and into the
9.
standby mode.
10. The PS2100 receiver and all the components connected to it are
turned OFF.
FEATURES OF SYSTEM CONTROL
1. Synchronized power ON/OFF
By switching the power button A or z, you can turn the CD-R
player and DVD player connected through the REMOTE
CONTROL bus connection ON or OFF.
2. Synchronized door open/close
Pressing the DOOR button of the remote control opens or closes
the doors of the components in the system.
3. Auto source selection
When the DVD in the DV2100 starts playing by pressing the play
button on the DV2100, the PS2100 receiver will change source
automatically and stop playing another source component
(DR2100).
4. Simple connection
The system can be connected very easily with a small number of
cables.
Note:
If the SYSTEM bus connection has been made, it is possible to dub
a CD to CD-R in the DR2100 while playing another source (Tuner
or DVD, etc.) Please refer to the instruction manual of the DR2100
for more details.
, and those on
.)
NO SYSTEM CONNECTION
When you use this unit in combination with other Marantz components
for which a system connections is not possible, or components of
other brands, you can use them independently by setting the system
control switch to INT position.
To operate the RC2100SR remote control, it is necessary to connect
to Marantz components to REMOTE CONTROL bus.
Please refer below.
PS2100
DV2100
ANALOG SYSTEM AUDIO COAX. DIGITAL OPT.
CD OUT IN OUT
IN CDR/CD OUT IN CDR/CD OUT
LEFT
RIGHT
DR2100
8
VIDEO
IN
MONITOR TV
(MD PLAYER MD2020)
SYSTEM SW
SET TO
EXT
SET TO
EXT
when using VCR IN/OUT
terminals for MD player
SET TO
EXT
REMOTE CONTROL
SYSTEM
IN
EXT. 110V-240V 50/60HZ
INT.
UNSWITCHED 200W MAX
OUT
AC OUTLET
SET TO
EXT
SET TO
INT
AC IN