Adjusting Chronograph Hands To Zero Position - Luminox CHRONOGRAPH Instruction Manual

Minute counter Centre stop-second
I II III
2 1
Hour counter 1 ⁄ second counter
10
Push-button A
III
2 1
Push-button B
Adjusting the chronograph
hands to zero position
Example:
One or several chronograph hands are not
in their correct zero positions and have to be
adjusted (e.g. following a battery change).
Pull out the crown to position III
(all 4 chronograph hands are in their
correct or incorrect zero position).
Keep push-buttons A and B depressed
simultaneously for at least 2 seconds
(the centre stop-second rotates by
360° corrective mode is activated).
A
Adjusting the centre stop second
Single step
Continuous
B Adjusting the next hand B
A Adjusting the
Single step
Continuous
B Adjusting the next hand B
Adjusting the minute counter hand
A
and the hour counter hand
(mechanical coupled)
Single step
Continuous
Returning the crown to position I
I II III Termination of the chronograph hands
adjustment (can be carried out at any time).
A
1 x short
A
long
1 ⁄ second counter hand (position 6h )
10
A
1 x short
A
long
A
1 x short
A
long