Selecting Units Of - La Crosse Technology WS-7034U-IT Instruction Manual

5.
Press and release the "SET" button to
move to the minute setting
6.
Press and release the "MIN/MAX"
button to set the minutes.
7.
Press and release the "SET" button to
activate the clock.
Note: When in 12h mode, there is only a
"PM" display, which appears under "TIME."
If there is no display here it is AM. Make
sure you set the time accordingly.
Selecting Units of Measurement
1.
Press and hold the "SET" button for 5
second until "12h" or "24h" appears
in the TIME LCD.
2.
Press and release the "SET" button
again, "°F" will appear in the TIME
LCD.
3.
Press and release the "MIN/MAX"
button to shift between °F and °C.
4.
Press and release the "SET" button
twice to activate settings.
8