La Crosse Technology WS-2308AL Operation Manual page 20

ALARM -
key
MIN/MAX -
key
PLUS (+) –
key
MINUS (-) –
key
*Press any key to activate the E.L. backlight
- In normal mode to enter the alarm programming
mode
- In alarm programming mode to select the
following setting modes:
- Time alarm setting
- Indoor temperature alarm (high & low)
- Outdoor temperature alarm (high & low)
- Indoor humidity alarm (high & low)
- Outdoor humidity alarm (high & low)
- Outdoor wind chill alarm (high & low)
- Outdoor dew point alarm (high & low)
- Rainfall alarm (24h, 1h)
- Pressure alarm (high & low)
- Wind speed alarm (high & low)
- Wind direction alarm
- In setting modes confirmation of the selected
values
- To exit MIN/MAX modes
- To reset general alarm symbol
- In normal display mode to toggle between
display of MIN/MAX values
- To toggle between MIN/MAX values in MIN/MAX
mode
- To exit any programming mode
- In normal display mode to toggle between format
of date display, seconds, time alarm and time
zone
- To increase the values in the setting modes
- To exit MIN/MAX modes
- In normal display mode to re-enter data learning
mode (long pressing for 2 seconds)
- In normal display mode to enable/disable the
buzzer alarm (long pressing)
- To decrease the values in the setting modes
- In basic programming mode audible storm alarm
ON/OFF
- To snooze the alarms off 24 hours when the
alarm is sounding
- In MIN/MAX modes to reset recorded values and
recorded dates and times
20