La Crosse Technology WS-2308AL Operation Manual page 15

transferring to the PC will be lost (for full details of PC use, please see
PC user manual in the enclosed Heavy Weather CD-ROM).
However if you wish to make a full reset of the base station and return
to the original factory settings, simultaneously press and hold the
PRESSURE and WIND keys for about 5 seconds. The base station
will beep once and the entire LCD will light up for 5 seconds and go
back to the original factory settings. This process with clear all
previous user defined values and all weather history recordings.
Factory default settings:
The following table shows the factory default values of the weather
station:
Matter:
Time
Date
Time zone
Alarm time
Relative air pressure
Weather-picture threshold
LCD contrast level
Rainfall per impulse
Storm alarm
Relative air pressure
alarm
Indoor temperature alarm
Outdoor temperature
alarm
Indoor humidity alarm
Outdoor humidity alarm
Wind chill alarm
Dew point alarm
Rainfall 24h alarm
Rainfall 1h alarm
Wind Speed
Wind direction alarm
Default Setting:
12:00 am
01.01.2001
-5 ET
12:00 am
29.91 inHg
0.09 inHg
5 (1-8 levels)
0.0204 inches
0.09 inHg
28.34 inHg
(low)
50ºF (low)
32ºF (low)
35%RH (low)
45%RH (low)
50ºF (low)
32ºF (low)
1.96 inches
0.03 inches
1.0 mph (low)
None set
15
30.71 inHg
(high)
86ºF (high)
104ºF (high)
65%RH (high)
70%RH (high)
86ºF (high)
68ºF (high)
62 mph (high)