Selecting Input Source; Picture Settings - Seiki SE60GY05 User Manual

CUSTOMIZING TV SETTINGS

Selecting Input Source

Picture Settings

Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color Temperature
Blue Screen
Auto Motion 120Hz
12
• Press the SOURCE button on the
• Press
• Press the MENU button on the main
• Press
Cycle among picture modes: Dynamic/Movie/User/
Standard.
Alternative: you may press the P.MODE button to
select the picture mode directly.
Adjust the difference between light and dark levels in
the pictures. (For User mode)
Increase or decrease the amount of white in the picture.
(For User mode)
Control the color intensity. (For User mode)
Adjust the balance between red and green levels.
Adjust the level of crispness in the edges between light
and dark areas of the picture. (For User mode)
Cycle among color temperature: Cool/Normal/Warm.
Allow the blue background to turn On/Off during weak or
no signal conditions.
Reduce the motion judder in the video: Low/Normal/
Strong/Off.
main unit or on the remote control to
display the Input Source list.
buttons to select your
desired input source among: TV/AV/
Component/HDMI1/HDMI2/HDMI3/
VGA and then press OK button to
confirm.
unit or on the remote control and
then press
PICTURE menu.
buttons to select the
following picture options and then
press buttons to adjust each
option's setting.
buttons to select