Advertisement

Operating Instructions
SE50UY04EC
En

Advertisement

Table of Contents
loading

Summary of Contents for Seiki SE50UY04EC

  • Page 1 Operating Instructions SE50UY04EC...
  • Page 3: Table Of Contents

    CONTENTS Important Safety Instructions Safety Information Preparation What is Included Front View Rear View Installing the Base Stand Removing the Stand for Wall-Mounting Remote Control Connecting External Devices General Operation Initial Setup Selecting the Input Source Channel Selection Display Channel Information Volume Adjustment Customizing TV Settings Channel Settings...
  • Page 4: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS • Read these instructions – All the safety and operating instructions should be read before this product is operated. • Keep these instructions – The safety and operating instructions should be retained for future reference. • Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. •...
  • Page 5: Safety Information

    SAFETY INFORMATION To ensure reliable and safe operation of this equipment, please carefully read all the instructions in this user guide, especially the safety information below. Electrical Safety • The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product.
  • Page 6: Preparation

    PREPARATION What is Included TV Set Remote Control with Batteries Base Stand Five Screws User Manual Quick Start Guide User Manual Quick Start Guide EN 6...
  • Page 7: Front View

    PREPARATION Front View 1. POWER Indicator Illuminates blue when the TV is turned on. Illuminates red when the TV is in standby mode. 2. IR (Infrared Receiver) Receive IR signals from the remote control. EN 7...
  • Page 8: Rear View

    PREPARATION Rear View 1. POWER 10. RF(75Ω) Input Switch the TV between On/Standby Connect to the antenna (75Ω VHF/UHF) mode. socket with the RF coaxial cable. 2. SOURCE 11. OPTICAL Digital Audio Output Press to select among different input Connect to the audio socket on the digital signal sources.
  • Page 9: Installing The Base Stand

    PREPARATION Installing the Base Stand • 1. Lay the TV face-down on a flat, cushioned surface to avoid damaging or scratching. • 2. Fix the Base Stand to the Base Support using 5pcs provided screws. Removing the Stand for Wall-Mounting •...
  • Page 10: Remote Control

    PREPARATION Remote Control EN 10...
  • Page 11: Connecting External Devices

    CONNECTING EXTERNAL DEVICES U-Vision Cable: 1.Designed for use with 4K Ultra HDTVs 2.Up-convert Full HD content into high-quality 4K Ultra HD 3.Improves picture quality of HD video content 4.Perfoms real-time detail enhancement,edge restoration and noise reduction HD Video Source 4K Ultra HDTV USB Port with HDMI output with HDMI input...
  • Page 12: General Operation

    General Operation CUSTOMIZING TV SETTINGS Initial Setup • Connect one end of the RF coaxial cable (not included) to the aerial socket on the wall and the other end of the cable to the RF (75) socket at the rear right bottom view of your TV.
  • Page 13 General Operation Installation Guide Please set the following options,then press OK button to begin auto tuning. OSD Language English DVB Select type DVB-T Country France ATV+DTV Tune Type Home Mode Mode Select Quit Move EXIT Selects your desired language to be displayed on the menu.
  • Page 14: Selecting The Input Source

    General Operation Selecting Input Source Input Source SCART YPBPR HDMI1 HDMI2 HDMI3 Quit Select Move EXIT • Press the SOURCE button on the front right side panel of the TV or the SOURCE button on the remote control to display the Input Source list. • Press the buttons to select the input source that you want: DTV / ATV / AV / SCART / YPBPR / HDMI1 / HDMI2 / HDMI3 / PC/ USB.
  • Page 15: Customizing Tv Settings

    CUSTOMIZING TV SETTINGS Channel Settings Antenna • Press the MENU button to display the main menu. Press the buttons to select CHANNEL and then press the OK button . • Press the buttons and then press the buttons to select Air or Cable,then press OK.
  • Page 16 CUSTOMIZING TV SETTINGS Channel Tuning : 0 Programme(s) DTV : 0 Programme(s) Radio : 0 Programme(s) Data : 0 Programme(s) (TV) 134.25 MHz Skip Quit MENU EXIT • If you want to skip the ATV tuning, press the MENU button to interrupt the tuning half way.
  • Page 17 CUSTOMIZING TV SETTINGS Selects a channel number. Storage To 1 System I Selects the sound system: I / DK / L / BG. Current CH 1 Displays the current channel number. Search Press the buttons to start the manual tuning. Press the buttons to make manual fine tuning Fine-Tune...
  • Page 18 CUSTOMIZING TV SETTINGS ATV Mode Programme Edit CH.Name Skip Lock Type 1 C-02 Skip Move Select Back Rename Delete MENU DTV Mode Programme Edit Skip Lock Type CH.Name 1 ABC HDTV 2 ABC TV Melbour 3 ABC2 4 ABC TV 1 ABC DIG Radio Radio 2 ABC DIG Jazz...
  • Page 19 CUSTOMIZING TV SETTINGS Signal Information (DTV Mode) • Press the MENU button to display the main menu. Press the buttons to select CHANNEL and then press the OK button. • Press the buttons to select Signal Information and then press the OK button to view the signal information.
  • Page 20 CUSTOMIZING TV SETTINGS CI Information Conax Conditional Access Product Ordering Subscription Status Event Status Change CA PIN Maturity Rating Note: This screen is for illustration only. Software Update (USB) • Press the MENU button to display the main menu. Press the buttons to select CHANNEL and then press the OK button.
  • Page 21 CUSTOMIZING TV SETTINGS Recorded List Programme No Information* No Information* No Information* Midday Report Midday Report Salut dem Kardinal Viruskriget Viruskriget (14) Delete Info. DISPLAY Index Select INDEX Delete Press the RED button to delete the selected programme. Press the DISPLAY button to display detailed information Info.
  • Page 22 CUSTOMIZING TV SETTINGS PVR File System Select Disk Start Check PVR File System USB Disk Format Time Shift Size Speed Move Select Back MENU Select the disk where you want to store your recorded Select Disk content. Press the OK button, the system will now check your USB device’s suitability for PVR.
  • Page 23: Picture Settings

    CUSTOMIZING TV SETTINGS Picture Settings • Press the MENU button to display the main menu. Press the buttons to select PICTURE and then press the OK button. buttons to select the option you want to adjust in PICTURE menu. • Press the • Press the buttons to adjust each option’s setting.
  • Page 24: Sound Settings

    CUSTOMIZING TV SETTINGS Sound Settings • Press the MENU button to display the main menu. Press the buttons to select SOUND and then press the OK button. • Press the buttons to select the option you want to adjust in SOUND menu. • Press the buttons to adjust each option’s setting.
  • Page 25: Time Settings

    CUSTOMIZING TV SETTINGS Time Settings • Press the MENU button to display the main menu. Press the buttons to select TIME and then press the OK button. • Press the buttons to select the option you want to adjust in TIME menu. • Press the buttons to adjust each option’s setting.
  • Page 26: Option Settings

    CUSTOMIZING TV SETTINGS Option Settings • Press the MENU button to display the main menu. Press the buttons to select OPTION and then press the OK button. • Press the buttons to select the option you want to adjust in OPTION menu. • Press the buttons to adjust each option’s setting.
  • Page 27: Lock Settings

    CUSTOMIZING TV SETTINGS Lock Settings • Press the MENU button to display the main menu. Press the buttons to select LOCK and then press the OK button. • Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu. Enter the default password “0000” for the first time use.
  • Page 28 CUSTOMIZING TV SETTINGS The PICTURE in the main menu can't be selected,when set it Picture Lock to on The SOUND in the main menu can't be selected,when set it to Sound Lock Time Lock The TIME in the main menu can't be selected,when set it to on The OPTION in the main menu can't be selected,when set it to Option Lock Key Lock...
  • Page 29: Using The Features

    Using the Features EPG (Electronic Programme Guide) (DTV Mode) This system has an Electronic Programme Guide (EPG) to help you navigate through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services.
  • Page 30: Using The Features

    Using the Features Button Functions in a 7 Days Guide Remote Control Button Function Press the button to view the schedule of the previous day. Press the button to view the schedule of the next day. Press to display detailed information of the selected DISPLAY programme (if available).
  • Page 31: Teletext (Atv Mode)

    Using the Features Press the YELLOW button to view the preset reminders or scheduled recordings in the schedule list. Press the MENU button to return to the EPG. Schedule List Time Channel Name Mode Date Programme Title Result Once 09:07 Fri.13 Jul The Secret Show 1 ABC HDTV...
  • Page 32: Digital Teletext (Dtv Mode)

    Using the Features Double height text If you have difficulty reading the text on the TV you can double the height of the text.Press the SIZE button. The top half of the page will be displayed in double height text.Press the SIZE button again. The bottom half of the page will be displayed in double height text.Press the SIZE button again to return to the full page.
  • Page 33: Pvr (Personal Video Recorder)

    PVR (Personal Video Recorder) Time Shift Function (DTV Mode) This function allows the TV to virtually record the live viewing broadcast programme. Before using Time Shift fuction, please make sure the USB device is inserted. Notes: • Time Shift Mode and Recording functions may not work if the signal strength is weak.
  • Page 34: Recording Dtv Programme Onto A Usb Storage Device

    PVR (Personal Video Recorder) Using the Remote Control You can shift playback to any point of the virtually recorded programme. The PVR Time Shift progress bar will be displayed on the screen for 5 seconds. Press the TIMESHIFT button to display the PVR Time Shift progress bar again. During playback, press the TIMESHIFT button to display TIMESHIFT a still screen.
  • Page 35: Timer Programming

    PVR (Personal Video Recorder) Timer Programming This function is used for scheduled recording. The recording from timer programme or direct recording may have a little bit delay when it starts to record the broadcast programme. Please make sure the USB device is inserted. If not, a warning message will pop • Press the MENU button to display the main menu.
  • Page 36: Play Recorded Programme

    PVR (Personal Video Recorder) Play Recorded Programme You can play a recorded programme from the recorded list or from a USB Storage Device. • Press the SOURCE button on the front right side panel of the TV or the SOURCE button on the remote control then press the buttons to select the USB mode and then press the OK button.
  • Page 37 PVR (Personal Video Recorder) C:\_MSTPVR Up Folder Return 20130709_011 20130709_012 307_(2 ABC1)_(Midday Report).ts Resolution: 720 x 576 Audio Track: Subtitle: --/0 Program: 20130709_013 20130709_014 20130709_015 20130709_016 Size: 236876 KBytes Delete Current File Add/Remove all 20130709_017 20130709_018 20130709_019 20130709_020 Add/Remove to playlist Move Menu Quit...
  • Page 38: Entertainment

    Entertainment Connecting a USB Storage Device • Connect your USB storage device to the USB port of your TV. • Press the button on the front right side panel of the TV or the button on the remote control to turn on your TV and your USB storage device. • Press the SOURCE button on the front right side panel of the TV or the SOURCE button on the remote control to display the Source List.
  • Page 39 Entertainment • Press the buttons to select your storage device and then press the OK button. • Press the buttons to navigate in the picture folder and then press the OK button. • Press the buttons to select the specified picture, a preview window will pop up. D:\Picture\JPEG 1/15 Return Up Folder...
  • Page 40: Listening To Music

    Entertainment Listening to Music • Press the SOURCE button on the front right side panel of the TV or the SOURCE button on the remote control then press the buttons to select the USB mode and then press the OK button. • Press the buttons to select MUSIC.
  • Page 41: Viewing Movies

    Entertainment Viewing Movies • Press the SOURCE button on the front right side panel of the TV or the SOURCE button on the remote control then press the buttons to select the USB mode and then press the OK button. • Press the buttons to select MOVIE.
  • Page 42: My Text

    Entertainment My Text • Press the SOURCE button on the front right side panel of the TV or the SOURCE button on the remote control then press the buttons to select the USB mode and then press the OK button. • Press the buttons to select TEXT.
  • Page 43: Specifications

    SPECIFICATIONS Panel Size 50 inch diagonally Display Type Panel Technology Panel 50 Hz Vs. 100 Hz 120 Hz Display Resolution 3840 x 2160 Panel Resolution 3840 x 2160 Aspect Ratio 16:9 Dynamic Contrast Ratio-Panel 3500:1 Brightness (Centre Typ.) Cd/M² Dimensions DxLxH (with foot) 250 x 1138 x 728 mm Weight (with foot) 22.5 kg...

This manual is also suitable for:

Se39uy04ecSe50uy01uk

Table of Contents