Table of Contents
Advertisement
To Attach the Base & Remove the Stand
To attach the base place the display unit flat on a table. First, attach the
1.
base onto the neck. Make sure the longer side of the base is towards the
front of the TV. Second, insert the plastic ring onto the bottom of the
base with the opening facing the metal that is protruding. Third, insert the
circular metal plate onto the plastic ring with the metal rail fitting the metal
that is protruding. Finally, screw in the 6 screws to secure the base.
Make sure the screws all fit in nicely. Do not over torque or force the
screws in!
To remove the stand, remove the 5 screws in the circled area and the
2.
base will come off.
- 8 -
www.SCEPTRE.com
SCEPTRE E326 HDTV User Manual
Advertisement
Table of Contents
