Samson EXPEDITION XP40i Owner's Manual page 14

XP40i and XP40iw Quick Start
XP40i and XP40iw - iPod Playback
Your Expedition XP40i system has many sophisticated features, but if you just want
to play music from your iPod, you can follow the simple steps below to get started.
• Unpack the XP40i or XP40iw system components and included adapter. Be
sure to save the packaging in case you ever move or need to send the unit for
service.
• Set the XP40i in place where you want to listen to your music.
• Turn all the input channels down by rotating the LEVEL control knobs to their
fully counter clockwise position. Then, set the BASS and TREBLE controls to
their 12:00 positions.
• Check that the rear panel POWER switch is set to the OFF position.Then, plug
the supplied power adapter into the rear panel DC inlet, and then, plug the
wall socket adapter into an acceptable power outlet, but don't turn the unit on
just yet.
• If your iPod came with a dock adapter (most do) install it into the iPod dock on
top of the XP40i or XP40iw.
• Next, install your iPod into the XP40i or XP40iw. Be sure the iPod is seated all
the way in and that it's making a good connection in the dock.
• Now power on your XP40i system using the rear panel POWER switch but keep
the volume down to start.
• Now press Play on your favorite iPod tune and adjust the XP40i's rear panel
iPod LEVEL control until your reach a comfortable listening level.
iPod
1
2
3
4
5
6
Monitor
8
7
8
9
10
11
12
13
14
15