Getting Started With Mac Os X - Samson Go Mic Owner's Manual

Getting Started with MAC OS X

The following example is for setting up the Go
Mic in MAC OS X .
1. To start using the Samson Go Mic, just plug
it in. The LED will light to indicate it is re-
ceiving USB power. The MAC will recognize
the USB audio device and automatically
install a universal driver.
2. To select the Go Mic as the computer's audio
input, open the System Preferences from
the dock or the main Apple Menu (figure
12).
Plug and Play - Some MAC OS DAW's, like Apple's
Garage band, will let you plug and play without
going to the Sound preference set up. When you
plug the Go Mic into the USB port you'll see a
dialog box that will ask you if you want to select
the Go Mic. Select yes and you're ready to go.
3. Next open the Sound preference (figure 13).
4. Now, click in the Input tab and select Go
Mic (figure 14).
5. To set the gain of the microphone, adjust
the Input volume slider at the bottom of the
Sound dialog box.
6. Next, click in the Output tab and select Go
Mic .
Installing the Go Mic
Go Mic
11
Figure 12
Figure 13
Figure 14