Salus SP120 Instruction Manual page 10

SP120 Manual Ver 005.qxd:Layout 1 6/1/11 09:00 Page 10
After correct selection of the day option, the
SP120 display will change to the next
programming screen. These screens allow you
to set the required time settings to provide
optimum control for your heating system.
The hour setting will be the first setting that
needs to be adjusted, and this will easily be seen
because the 'hours' section of the time will be
flashing. Using the Touch Ring, scroll up or
down to adjust the hour to the required setting
and then press the OK key to confirm. After
confirming this setting the 'minutes' section of
the time will then start to flash. Change this
setting using the Touch Ring in the same way
that you changed the hour setting, confirming
your setting with the OK key.
Following this sequence you will have set up
Programme 1 – the SP120 display will then
move on to Programme 2. Continue to add your
desired settings for each of the programmes
through to Programme 3 in the same way as
Programme 1 (hour and minutes). Note that the
Hour setting is changed in increments of 1 hour,
the Minutes setting is changed in increments of
10 minutes.
If you decide to enter settings for individual days rather than Weekdays or Weekends, the SP120
also offers a time saving COPY function that allows the user to copy settings from one day to another.
10 SP120 INSTRUCTION MANUAL