Teamdc Call Information; Opt-In Teamdc; Invites; Send An Invite - Kyocera Sprint DuraXT User Manual

1. In standby mode, press CONTACTS (right softkey).
2. Highlight a TeamDC group and press OPTIONS (right softkey) > Remove Me.
3. Press REMOVE (left softkey).
Note: This action also deletes the TeamDC group you belonged to from your Contacts.
Note: TeamDC group membership can either be forced or non-forced. With a forced TeamDC
group, an end user on the same account cannot be removed from the group, whereas a
user not on the same account can.

TeamDC Call Information

Your phone's display may show some useful information during a TeamDC call.
During a TeamDC call, the following information may appear on your screen:
● The name of the group.
● The name or Direct Connect number of the person speaking.
● The number of TeamDC members who are connected to the call out of the number
invited (for example, 4 out of 6).

Opt-In TeamDC

Opt-In TeamDC works like a chatroom. You can make and manage Opt-In TeamDC groups in
the same way as you would for TeamDC groups on the Web. You can also send an Invite
during an Opt-In TeamDC call to the group members who have not yet joined the call. (See
Send an Invite during a

Invites

You can send an Invite to initiate a Group Connect call. When the group members receive an
Invite, their phones sound a tone and display your name (if it is in Contacts).
While on a call, you may also send an invitation message to a specific Contacts entry, or to the
group members who have not joined the call yet.

Send an Invite

Reply to an Invite
Send an Invite
You can send an Invite to initiate a call. You can also send an Invite during a call to those who
have not joined the call yet.
Send an Invite to start a call
1. Select a group from History or Contacts.
Sprint Direct Connect
call.)
51