Connecting Vcr - Kogan KALED55XX1ZA User Manual

External Connection

Connecting VCR

These instructions assume that you have already connected your TV to an antenna or a
cable TV system. Skip step 1 if you have not yet connected to an antenna or a cable
system.
VCR Rear Panel
ANT ANT OUT S-VIDEO
1
RF Cable (Not supplied)
1
YPbPr cable(supplied)
2
Audio Cable (Not supplied)
3
Follow the instructions in Viewing a VCR or Camcorder
Tape to view your VCR tape.
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection
terminal to the cable.
1. Unplug the cable or antenna from the back of the TV.
2. Connect the cable or antenna to the ANT IN terminal on
the back of the VCR.
3. Connect an RF Cable between the ANT OUT terminal
on the VCR and the ANT IN terminal on the TV.
4. Connect a Component Cable between the COMPONENT
[Y, Pb, Pr] jacks on the DVD player and YPbPr
on the TV.
5. Connect Audio Cables between the AUDIO OUT jacks
on the VCR and the AUDIO L and AUDIO R jacks on
the TV.
6. The video output can output full TV signal from Av1, Av2,
ATV, DTV.
Note: 1. Whenever you connect an external device to your TV, make sure that power on
the unit is turned off.
2. When connecting an external device, match the color of the connection terminal
to the cable.
VIDEO OUT
2
17
TV Rear Panel
AUDIO OUT
3
Red
Blue
jack
Green
USB 2
USB 1
HDMI 4
HDMI 3
L
R
AUDIO
Pr
Pb
Y / V2
L
R
AUDIO
YPbPr