Basic Operations; Switching Power On/ Off; Adjusting The Volume; Selecting A Channel - Kenwood TK-7102H Instruction Manual

S P ON/ OFF
WITCHING OWER
Press the switch to switch the transceiver ON.
Press and hold the
transceiver OFF.
A V
DJUSTING THE OLUME
Press the ▲ key to increase the volume and the ▼ key to decrease the volume.
S C
ELECTING A HANNEL
Select your desired channel by pressing a key from 1 to 4.
T
RANSMITTING
Note: Before transmitting, first monitor the channel to make sure it is not already in use.
1 Select your desired channel by pressing a channel key (1 ~ 4).
• If the channel is busy, wait until it becomes free.
2 Press the microphone PTT switch and speak into the microphone. Release
the PTT switch when you have finished speaking.
• For best sound quality at the receiving station, hold the microphone approximately
1.5 inches (3 ~ 4 cm) from your mouth.
R
ECEIVING
1 Select your desired channel by pressing a channel key (1 ~ 4).
2 When you hear a signal, readjust the volume level if necessary.
3 Respond to the call as described in step 2 of "T
6

BASIC OPERATIONS

switch for approximately 1 second to switch the
", above.
RANSMITTING