Specific Safety Rules - Ryobi RP4020 Operator's Manual

 Never touch the probes to a voltage source when the test
leads are plugged into the 10A or 400mA input.
 Before use, verify the meter's operation by measuring a
known voltage.
 To avoid possible damage to the meter or to the equipment
under testing, follow these guidelines:
• Disconnect circuit power and discharge all high-voltage We declare under our sole responsibility that this product is in
capacitors before testing resistance, continuity, or conformity with the following standards or standardized documents.
diodes.
2006/95/EC
• Before measuring current, check the meter's fuses and
EN61010-1:2001
turn power OFF to the circuit before connecting the
EN61010-031:2002
meter to the circuit.
We declare under our sole responsibility that this product is in
conformity with the following standards or standardized documents.
2006/95/EC
EN61010-1:2001
EN61010-031:2002
We declare under our sole responsibility that this product is in
We declare under our sole responsibility that this product is in conformity with the following standards or
conformity with the following standards or standardized documents.
standardized documents.
2006/95/EC
EN61010-1:2001
2006/95/EC
EN61010-031:2002
EN61010-1:2001
EN61010-031:2002
Machine: 4V Digital Multimeter
Name of company: TECHTRONIC INDUSTRIES CO. LTD.
Address:
Web:
Trademarks:
The use of the trademark Ryobi is pursuant to a license granted by Ryobi Limited.

SPECIFIC SAFETy RULES

DECLARATION OF CONFORMITY
DECLARATION OF CONFORMITY
DECLARATION OF CONFORMITy
DECLARATION OF CONFORMITY
24/F, CDW BUILDING
388 CASTLE PEAK ROAD
TSUEN WAN
HONG KONG
www.ttigroup.com
 Save these instructions. Refer to them frequently and
use them to instruct others who may use this product.
If you loan someone this product, loan them these
instructions also.
Name/Title:
Signature:
5 – English
Type: RP4020
Brian Ellis
Vice President - Engineering