Important Safety Instructions - Ryobi RP4050 Operator's Manual

Tek4 4 volt stud sensor
Table of Contents

Advertisement

Available languages

Available languages

WARNING!
Read all instructions. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
SAVE THESE INSTRUCTIONS
 Shielded wires or wires in conduits or behind thick
walls cannot be reliably detected. Always turn the AC
power off when working near live wires.
 This device detects the general location of live
electrical wires. Once you have detected the location,
turn off the electricity to the wires before proceeding
with any type of demolition to avoid the possibility of
electrocution.
 Readings on some surfaces may be unreliable. Be
aware that wallpaper containing metallic foil or fibers and
plaster with metal mesh may cause the unit to function
improperly.
 Do not expose product to rain or wet conditions.
Water entering a product will increase the risk of electric
shock.
 Use only with charger listed.
MODEL
BATTERY PACK
RP4050
AP4001
 Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
product in unexpected situations.
PRODUCT USE AND CARE
 Use the product and accessories, etc., in accordance
with these instructions and in the manner intended
for the particular type of product, taking into account
the working conditions and the work to be performed.
Use of the product for operations different from those
intended could result in a hazardous situation.
BATTERY PRODUCT USE AND CARE
 Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
 Use product only with specifically designated battery
packs. Use of any other battery packs may create a risk
of injury and fire.
 When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.

IMPORTANT SAFETY INSTRUCTIONS

CHARGER
AP4500, AP4700,
AP4800
 Under abusive conditions, liquid may be ejected from
the battery, avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
 Battery products do not have to be plugged into
an electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
when not using your battery product or when changing
accessories. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
 Do not place battery products or their batteries near
fire or heat. This will reduce the risk of explosion and
possibly injury.
 Do not crush, drop or damage battery pack. Do not
use a battery pack or charger that has been dropped
or received a sharp blow. A damaged battery is subject
to explosion. Properly dispose of a dropped or damaged
battery immediately.
 Batteries can explode in the presence of a source
of ignition, such as a pilot light. To reduce the risk of
serious personal injury, never use any cordless product
in the presence of open flame. An exploded battery can
propel debris and chemicals. If exposed, flush with water
immediately.
 Do not charge battery product in a damp or wet
location. Following this rule will reduce the risk of electric
shock.
 For best results, your battery product should be
charged in a location where the temperature is
more than 50°F but less than 94°F. To reduce the risk
of serious personal injury, do not store outside or in
vehicles.
 Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in contact
with your skin, wash immediately with soap and water.
If liquid gets into your eyes, flush them with clean
water for at least 10 minutes, then seek immediate
medical attention. Following this rule will reduce the risk
of serious personal injury.
SERVICE
 When servicing the product, use only identical replace-
ment parts. Follow instructions in the Maintenance sec-
tion of this manual. Use of unauthorized parts or failure to
follow Maintenance instructions may create a risk of
shock or injury.
 Save these instructions. Refer to them frequently and
use them to instruct others who may use this product.
If you loan someone this product, loan them these
instructions also.
3 — English

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rp4050 tek4 4

Table of Contents