Compliance Information - Runco VideoWall VW-100HD Installer/Integrator Manual

Compliance Information

DECLARATION OF CONFORMITY:
Manufacturer's Name: Runco International, LLC
Manufacturer's Address: 1195 NW Compton Drive, Beaverton, OR 97006-1992
hereby declares that the Products' Model Numbers:
VideoWall™ VW-100HD and CineWall™ CW-95HD
conform with the provisions of:
Council Directive 2004/108/EC on Electromagnetic Compatibility;
EN 55022 "Limits and methods of measurements of radio interference characteristics of information technology equipment"
1998;
EN 55024 "Limits and methods of measurements of immunity characteristics of information technology equipment" 1998;
Including:
• EN 61000-4-2 "Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 2:
Electrostatic discharge immunity test"
• EN 61000-4-3 "Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 3: Radiated,
Radio-Frequency, Electromagnetic Field Immunity Test"
• EN 61000-4-4 "Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 4: Electrical
fast transient/burst immunity test"
• EN 61000-4-5 "Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 5: Surge
immunity test"
Note
• EN 61000-4-6 "Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 6: Conducted
disturbances induced by radio-frequency fields immunity test"
• EN 61000-4-8 "Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 8: Conducted
disturbances induced by power frequency magnetic fields immunity test"
• EN 61000-4-11 "Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 11: Voltage
dips, short interruptions and voltage variations immunity tests"
During high-voltage spikes in AC power, this product's surge protection circuit may require
re-starting the unit. This behavior is normal.
iv VideoWall™/CineWall™ Installer/Integrator Manual