2. From the items shown, choose the item that you want to initialize .
Displayed item
ALL
MIC PRE
DIRECT MIX
REVERB
PATCH BAY
A confirmation screen will appear.
3. Click [OK] to initialize, or click [Cancel] to cancel without initializing .
Checking the signal flow
From the "Device" menu, choose [Show the signal flow] to view a block diagram.
Driver settings
Here's how to view or modify the driver settings.
Windows users
From the "Driver" menu, choose [Driver Settings].
Mac OS X users
From the "OCTA-CAPTURE Control Panel" menu, choose [Driver Settings].
For details, refer to "Driver Settings" (p. 69).
View in foreground
Windows users
From the "Driver" menu, choose [Always on top].
Mac OS X users
From the "OCTA-CAPTURE Control Panel" menu, choose [Always on top].
Content that will be initialized
Preamp, direct mixer, reverb, and patch bay
Compressor settings and preamp settings
Direct mixer A–D settings
Reverb settings
Patch bay settings
53