Section 3. Using effects
Mastering Tool Kit
Algorithm List
MT BANK [MSTR TOOL KIT]
The Mastering Tool Kit's algorithms are
composed from the following effects.
=[IN]=[CMP]=[MIX]=[LIM]=[OUT]=
INPUT
3BAND COMP
MIXER
LIMITER
OUTPUT
80
Parameter List
3BAND COMP
This compresses the overall output signal when
the input volume level exceeds a set value.
On/Off
This parameter turns the compressor effect on/
off.
Lo Threshold
This sets the volume level at which the lower-
range compressor goes into effect.
Lo Ratio
This sets the ratio of suppression of the lower-
range output when the input level exceeds the Lo
threshold level.
Lo Attack
This sets the time it takes for the lower-range
compressor to go into effect once the input level
exceeds the Lo threshold level.
Lo Release
This sets the time it takes for the lower-range
compressor effect to stop once the input level
falls below the Lo threshold level.
Mid Threshold
This sets the volume level at which the midrange
compressor goes into effect.
Mid Ratio
This sets the ratio of suppression of the midrange
output when the input level exceeds the Middle
threshold level.
Mid Attack
This sets the time it takes for the midrange
compressor to go into effect once the input level
exceeds the Middle threshold level.
Mid Release
This sets the time it takes for the midrange
compressor effect to stop once the input level
falls below the Middle threshold level.
Hi Threshold
This sets the volume level at which the upper-
range compressor goes into effect.
OFF, ON
-24 – 0 dB
1:1.00 – 1:16.0, 1:INF
0 – 100 ms
50 – 5000 ms
-24 – 0 dB
1:1.00 – 1:16.0, 1:INF
0 – 100 ms
50 – 5000 ms
-24 – 0 dB