Programming A Memory Channel - Icom IC-A24 Instruction Manual

4
MEMORY OPERATION
■ Programming a memory
channel
The transceiver has 200 (20 CH × 10 BANK) memory chan-
nels for storage of often-used frequencies.
q Push [CLR•
DEL
sary.
w Select the desired frequency.
• Push , then push [ENT•
• Set the desired frequency or weather channel* using [DIAL] or
keypad.
e Push , then push [MR•
ing mode.
• "M", Memory BANK and memory channel number are blink.
r Rotate [DIAL] to select the desired memory channel
number.
• Push , then push [0•
BANK number if desired.
• Push [CLR•
DEL
exit the BANK selection mode.
t Push [ENT•
WX
nel and return to the frequency mode.
13
] to select the frequency mode, if neces-
] to select a weather channel.*
WX
] to enter the memory writ-
MW
], and rotate [DIAL] to select the
BANK
], [ENT• ] or push then push [0•
WX
] to program the information into the chan-
*Weather channel: U.S.A. version only.
• EXAMPLE: Programming WX-05* into memory BANK 3/
memory channel 9.
Push
Push
Push
(or rotate [DIAL])
] to
BANK
Push
(or rotate [DIAL])
Push
or
Push
Push or
or
Push