Table of Contents
Advertisement
D D Transmission condition setting
q Push [F•
] to display the function guide.
wPush [MENU](V/MHz•SCAN)
"MENU" screen.
eRotate [DIAL] to select "DV SET MODE," then push
[MAIN•BAND].
rRotate [DIAL] to select "DV DATA TX," then push
[MAIN•BAND].
t Rotate [DIAL] to select the desired transmission condition.
: The entered text data in the Terminal Window
PTT
is transmitted when [PTT] is
(buffer screen)
pushed.
(default)
AUTO : The entered text data in the Terminal Window
is automatically transmitted when
(buffer screen)
text is entered.
yPush [BACK](V/MHz•SCAN)
exit from DV set mode screen.
DV MODE OPERATION (Optional UT-123 is required)
to display the
(Right band's)
three times to
(Right band's)
■ DV voice memory
The IC-E2820 has a DV voice memory that records a total of
30 sec. (approx.) of received audio.
The DV voice memory is divided into 2 tracks, 15 seconds
each in a track, as the default setting.
D D Recording received audio
qSelect DV mode in main band, and deactivate the priority
watch
if activated.
(p. 80)
wWhile receiving a DV signal, push [F•
the function guide 2.
ePush [REC](M/CALL•MW)
REC track screen.
r Rotate [DIAL] to select the desired track.
• Bar meter is displayed for the track that has been recorded.
t Push [REC](M/CALL•MW)
• Track counter (bar meter) is displayed during record.
• The recording is paused automatically when the DV signal is in-
terrupted or when the DV audio signal cannot be received cor-
rectly. Re-starts the recording when the DV audio signal is
received correctly.
y Push [■](TONE•DTMF) to stop recording.
• The recording stops automatically when the track becomes full.
5
] twice to display
to display the
(Right band's)
to start recording.
(Right band's)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
58
Advertisement
Table of Contents
