Icom IC-2710H Instruction Manual page 75

KEY FUNCTION
Clears a digit before entry.
MW
CLR
Cancels the scan, priority watch, pager,
A
code squelch or DTMF memory function.
Enters set mode and advances the set
D-OFF
SET
mode selection order.
B
Decreases the set mode selection order
T-OFF
after entering set mode.
SPCH
C
NOTE:
The IC-2710H has no voice synthesizer
function.
DEMO
Sets the keypad for numeral input.
ENT
D
Opens and closes the accessed band's
SCAN
MONI
squelch.
M
REAR LOCK Selects 1 of the 4 preset squelch levels.
SQL
#
SECONDARY FUNCTION (After
Writes the VFO contents into the memory
channel or call channel.
Advances the memory channel number
when continuously pushed after program-
ming is completed.
Turns the pager, code squelch, DTMF
memory or DTMF remote function OFF.
Turns the subaudible tone encoder, or op-
tional pocket beep/tone squelch OFF.
Enters and exits demonstration mode.
Starts and stops scanning.
Starts tone scan while an optional tone
squelch is in use.
Locks all the keys on the microphone key-
pad.
WIRELESS OPERATION
OTHER FUNCTIONS
FUNC
)
DTMF
KEY
• After :
Transmit the appropriate
DTMF code.
[ B MONI]
Transmits a 1750 Hz tone
call signal for 1 sec.
[ A SQL]
Transmits a 1750 Hz tone
call signal while pushing.
16
70