Login And Logout; Login - Ricoh Remote Communication Gate S User Manual

2. Login and Logout

This chapter explains the procedures for logging in and out of the Remote Communication Gate S server.

Login

To log in to the Remote Communication Gate S server, the following information is required and must be
obtained from the administrator in advance:
• URL of the Remote Communication Gate S server
• User name
• Password
• Domain name (If required)
• If you are using Windows Server 2003 or 2008, settings must be made in advance. Contact
the administrator.
• When using Remote Communication Gate S, do not use your browser's [Back] button or other
browser functions. Use only the navigation controls on the content pages.
• If you want to switch users, click the [Logout] button, and then log in again as a different user.
Do not use your browser's [Back] button to redisplay the login screen.
1. Start Internet Explorer.
2. Enter the following URL in the address bar, and then press the [Enter] key on the keyboard.
Condition
Without SSL encryption
With SSL encryption
• {host name}: name of the Remote Communication Gate S server
• {IP address}: IP address of the Remote Communication Gate S server
• {port number}: port number specified when Remote Communication Gate S was installed
http://{host name}:{port number}/mgmt
or
http://{IP address}:{port number}/mgmt
https://{host name}:{port number}/mgmt
or
https://{IP address}:{port number}/mgmt
URL
2
13