Table of Contents
Advertisement
OPERATION
During the warm-up period, check
the oil pressure indicator (p.
overheat indicator (p.
cooling system indicator (p.
If the indicators show any
abnormal condition, immediately
stop the engine and determine the
cause of the problem. Refer to
TAKING CARE OF
UNEXPECTED PROBLEMS
p.
123
126
.
6.
If the fast idle button was used to
warm up the engine, gradually
return the control lever to the N
(neutral) position as the engine
warms up.
66
EMERGENCY STARTING
42
),
43
), and
If the battery is discharged or the
44
).
starter motor is inoperative, you can
start the engine manually using the
emergency starter rope supplied with
the outboard motor.
on
ENGINE COVER
LATCHES
(front/rear)
1.
Turn the ignition switch key to the
OFF position (p.
2.
Unlatch the engine cover latches
and remove the engine cover.
UNLOCK
71
).
6 mm WASHER
6
25 mm
FLANGE BOLT
ALTERNATOR
COVER
CLAMP
HOOKS
CLAMP
BREATHER
(on the silencer case)
TUBE
3.
Release the breather tube from the
four clamps.
4.
Remove 6
25 mm flange bolt
and 6 mm washer, and then
remove the alternator cover.
5.
Secure the breather tube to the
clamp of the silencer case.
Take care not to lose the bolt and
washer.
CLAMPS
Advertisement
Table of Contents
