Honda Accord Coupe Owner's Manual page 400

WING BOLT
SPACER CONE
16. Place the flat tire face down in the
spare tire well.
17. Remove the spacer cone from the
wing bolt, turn it over, and put it
back on the bolt.
SPACER CONE
TAB
To remove the spacer cone, squeeze
the tabs on the wing bolt to
disengage it from the center of the
spacer cone, then pull the bolt
downward.
To install the wing bolt to the spacer
cone, reverse this procedure.
18. Secure the flat tire by screwing
the wing bolt back into its hole.
2012 Accord Coupe
Changing a Flat Tire
19. Store the jack and tools in the tool
kit case. Place the tool kit case in
the flat tire.
Loose items can fly around the
interior in a crash and could
seriously injure the occupants.
Store the wheel, jack, and tools
securely before driving.
20. Store the center cap in the trunk.
Make sure it does not get
scratched or damaged.
21. Lower the trunk floor, then close
the trunk lid.
22. Your vehicle's original tire has a
tire pressure monitoring system
sensor. To replace a tire, refer to
Changing a Tire with TPMS
page 328 ).
(see
397