Symbols - Homelite F2035 UT70123A Operator's Manual

Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the tool better and more safely.
SYMBOL NAME
Safety Alert Symbol
Read Your Operator's Manual
Wear eye and hearing protection
Keep bystanders away
Ricochet
RPM Decal
9,000
min -1
No Smoking
Petrol
Oil
Mix Petrol and Oil
Switch
No blade

SYMBOLS

EXPLANATION
Indicates danger, warning or caution. It means
attention!!! Your safety is involved.
Your manual contains special messages to bring
attention to potential safety concerns as well as
operating and servicing information. Please read all
the information carefully to assure satisfaction and
safe use.
Wear eye and hearing protection when operating
this equipment.
Keep all bystanders at least 15 m (50 ft)
away.
Danger of Ricochet.
Rotational direction and maximum speed of the
shaft for the cutting attachment.
Do not smoke when mixing fuel or filling fuel tank.
Use unleaded petrol intended for motor vehicle use
with an octane rating of 87 ([R + M] / 2) or higher.
Use 2-cycle oil for air-cooled engines.
Mix the fuel mix thoroughly and also each time
before refuelling.
On/Off Switch
I = ON to Run
O = OFF to Stop
Do not install any type of blade on this unit.
4