Table of Contents
Advertisement
Volume Controls
To increase or decrease the system volume
• Press the VOLUME + or VOLUME
the remote controlor turn the VOLUME Control on
the front panel.
The Volume Level Indicator will appear on the
display when you change the volume level. The
level indicator ranges from VOL MIN to VOL MAX.
When the power is switched off automatically returns to the same level when the
power is switched on again.
Note : If VOLUME setting is over 26 when the unit is turned off, it will revert to 26
when the unit is turned on again.
(
)
EQ
Electronic Preset Equalizer
The preset equalizer allows you to adjust the sound
characteristic for the most popular types of music.
• Press the EQ button to cycle through the following
equalizer settings: CLASSIC, ROCK, POP, JAZZ,
.
FLAT
The appropriate EQ indicator briefly appears on the display to confirm your
selection, and your selection is shown at the bottom of the display. The system
remembers the EQ setting when the power is switched off and returns to the
same setting when the power is switched on again.
DBBS (Dynamic Bass Boost) Control
• Press the DBBS button to increase the bass response
"
briefly on the display and
X-BASS
• Press again to cancel the Bass Boost function.
16
AUDIO CONTROLS
–
buttons on
"
"
BBS-ON
appears •
"
remains in the lower left of the display.
(
MUTE Button
On Remote Control Only
• Press the MUTE button on the remote control to
shut off the speakers temporarily.
"
The sound stops and the
MUTE
shows in the display.
• Press the MUTE button again to cancel the mute
function and restore the sound. The
The mute function will also be canceled automatically by pressing the
VOLUME + or VOLUME
–
buttons.
Random Playback
(
On Remote Control Only
The Random playback feature allows you play all the tracks on the disc in
random order. You can select random playback while the disc is playing or when
the player is stopped.
• Load a CD in the player as usual and then press the RANDOM button on the
remote control handset.
"
"
The
RNDM
indicator appears in the display.
The player will randomly select a track from the
disc and begin playback. Random playback will
continue until all tracks have played once, then
the player stops.
• To stop Random playback, press the RANDOM button on the remote control
"
"
again. The
RNDM
indicator disappears and normal playback will resume
from that point.
(
INTRO Scan Play back
On Remote Control Only
This feature allows you to play just the first 12 seconds of each track on the disc.
This may be useful when you are trying to locate a specific song but you do not
remember the track number.
)
"
indicator
"
"
MUTE
indicator disappears.
)
)
17
Advertisement
Table of Contents
