Grundig GLCD3201 Instruction Manual page 20

Chapter 2 Installing the LCD TV
Use a supplied antenna cable to connect the TV signal to the LCD TV's TV CABLE
terminal.
Connect the AC power cord at the back of the TV and connect the power cord to wall
outlet.
This TV is equipped with a safety fuse. In the event of an electrical storm or power
outage the safety fuse is designed to protect your TV. If your TV has no power, check
the fuse by prying the cover off, following the illustration below. If the fuse is blown, visit
your local hardware store and ask for a 4A 250V - 5x20mm Time Lag Fuse (Slow Blow)
to replace the fuse.
(Using a metal tool may cause shock)
BE SURE TO UNPLUG AC POWER CORD BEFORE REMOVING THE FUSE.
Press the
Always disconnect the LCD TV from the power outlet when the LCD TV will
not be used for a long period of time.
The
standby, it does not disconnect the device from the main voltage. To
completely disconnect the main voltage, please remove the power plug from
the socket.
TV CABLE
VHF/UHF IN VHF/UHF IN
TV CABLE
VHF/UHF IN
Firm Plastic Prying Tool
Back of TV
button on the remote to turn on the LCD TV.
button on the front panel is only used for switching the LCD TV into
4A 250V
5x20mm
Fuse
18