Grundig GLCD3201 Instruction Manual page 10

Chapter 1 Introducing the LCD TV
Fit the TV stand onto the back of the TV unit as shown below. Use the screwdriver to tighten
the four screws on the rear of the speaker until the screw is firmly fixed in place.
Hold the TV stand and place it on the six screw holes on the back of the unit as shown. Use
the screwdriver to tighten the six screws on the rear of the speaker until the screw is firmly
fixed in place.
Adjust the stand to your desired angle. The stand angle can be rotated 30
left.
30
The left and right sides on the rear of TV have an output jack to used in the
outside speakers.
If you prefer to mount your LCD TV on a wall instead of attaching it to the
stand, please reference the instructions included in the wall mounting kit
(not included).
o
30
8
VOL.- VOL.+ CH CH MENU SOURCE /I
completed
O
to the right and
o