Basic Operation
To use the planer:
1.
2.
3.
4.
5.
Figure 16
Figure 16.
6.
Figure 16
Note: Anytime you switch directions with the
cutterhead elevation crank, there will be a
small amount of backlash—the amount the
crank moves before the cutterhead begins
to move. However, as long as you move the
handle in the same direction during opera-
tion, backlash will not be a factor.
7.
8.
9.
10.
Note: The infeed and outfeed rollers will con-
trol the feed rate of the workpiece through the
planer. Do not push or pull on the workpiece
during operation.
OFF
Step 10
11.
Step 10
ON