Table of Contents
Advertisement
set UP
MANUAL POWER OFF
The HERO3 can be configured to automatically power oFF after a specific
period of inactivity (when no Videos or Photos are being taken and no
buttons have been pressed).
MANUAL
(Default)
60
sec
120
sec
300
sec
46
MONTH / DAY / YEAR / TIME
Set the HERO3 clock to ensure Video and Photo files are saved with the
correct date and time.
to change month/Day/Year/time:
1. Verify the camera is in settings mode. If the settings
camera's LCD screen is not showing, press
2. Press
to enter
menu.
3. Use
to cycle through settings to locate
4. Press
to enter set up.
5. Use
to locate
.
6. Press
to enter month/Day/Year/time sub-menu; month (mm) will
be highlighted.
7. Press
to access the list of months (1 to 12).
8. Use
to cycle through list until desired selection is highlighted.
9. Press
to select.
10. To advance to the next option, press
11. Repeat steps 7, 8 and 9 to make selections for day (DD), year (YY), hour
(hh) and minutes (mm).
12. To exit, hold down
for two seconds or cycle through to
press
.
note: If the battery is removed from the camera for an extended period of time
month/DAY/YeAr/time will need to be set again.
set UP
icon on your
repeatedly until it appears.
.
.
and
47
Hide quick links:
Advertisement
Table of Contents
