Table of Contents
Advertisement
FENDER
®
PROFESSIONAL TUBE AMPLIFIERS
ALL TUBE PREAMP AND POWERAMP
GENERATE THAT TONE AS ONLY
TUBES CAN
MAGNETIC INTERFERENCE REDUCING
CHASSIS ELIMINATES UNWANTED NOISE
AND RADIO INTERFERENCE
FENDER
SPECIAL
PERFORMANCE SPEAKERS
ROAD-WORTHY
COMPONENTS,
HANDLING THE MOST DEMANDING
PERFORMANCE SITUATIONS
CONSTRUCTED
SELECTED
WOODS,
RUGGED
CORNER
ENDURING RELIABILITY
COVERED IN GENUINE TOLEX
LONG LIFE AND LASTING GOOD LOOKS
DESIGN
HIGH
AND
MUSICAL
CAPABLE
OF
FROM
HAND-
EMPLOYING
JOINERY
FOR
®
FOR
VIBRO-KING
®
INTRODUCTION
Congratulations on your purchase of a Fender
Vibro-King Professional Tube Amplifier. The Vibro-
King is a single channel all tube combo amplifier built
entirely using point to point wiring. Moreover, each
Vibro-King amplifier is individually hand-crafted from
the finest components available and assembled at
the Fender Amplifier Custom Shop in Corona,
California, USA.
The All-Tube Vibro-King features 3 Reissue "Blue
Frame" 10" speakers with Alnico Magnets speakers
and is rated at 60 Watts R.M.S. into 2Ω. Furthermore,
the Dwell, Mix and Tone knobs control the all-tube
reverb allowing a "custom" designed reverb tone. Still,
the footswitch offers the ability to remotely switch on
and off both the Vibrato and Fat features. With the
built-in effects loop, adding an external signal
processor is a snap.
Designed for the most discriminating of guitarists, the
Vibro-King produces tones ranging from the crystal
clean to a smooth yet smooth overdriven crunch.
Couple the Vibro-King with the optional Vibro-King
212 Enclosure and you have an amplifier that is
undoubtedly The King of Tone.
In order to thoroughly understand the operation,
features and functions of your Fender
Professional Tube Amplifier, please read and refer as
needed to this operation manual. By doing so, your
amplifier is sure to provide you with years of trouble-
free music making and maximum playing enjoyment.
®
®
Vibro-King
®
Advertisement
Table of Contents
