Set Supervisor/User Password - Gigabyte P4 Titan Series GA-8S655FXUltra User Manual

Set Supervisor/User Password

CMOS Setup Utility -Copy right (C) 1984-2003 Aw ard Softw are
}Standard CMOS Features
}Adv anced BIOS Features
}Integrated Peripherals
}Pow er Management Setup
}PnP/PCI Configurations
}PC Health Status
}Frequency /Voltage Control
ESC:Quit
F8: Dual BIOS
(j)
When you select this function, the fol l owing message will appear at the center of the screen to assist
you in creating a password.
Type the password, up to eight characters, and press <Enter>. You will be asked to confirm the
password. Type the password again and press <Enter>. You may also press <Esc> to abort the
selection and not enter a password.
To disable password, just press <Enter> when you are prompted to enter password. A message
"PASSWORD DISABLED" will appear to confirm the password being disabled. Once the password is
disabled, the system will boot and you can enter Setup freely.
The BIOS Setup program allows you to specify two separate passwords:
SUPERVISOR PASSWORD and a USER PASSWORD. When disabled, anyone may access
all BIOS Setup program function. When enabled, the Supervisor password is required for entering the
BIOS Setup program and having full configuration f i elds, the User password is required to access only
basic items.
If y ou select "System" at "Password Check" in A dvance BIOS Features Menu, you will be
prompted for the password every time the system is rebooted or any time you try to enter Setup Menu.
If you select "Set u p" at "Password Check" in Advance BIOS Features Menu, you will be prompted
only when you try to enter Setup.
j For GA-8S655FX Ultra only.
GA-8S655FX Series Motherboard
Enter Password:
/Q-Flash
Change/Set/Disable Passw ord
Figure 12: Passw ord Setting
- 60 -
Top Performance
Load Fail-Safe Defaults
Load Optimized Defaults
Set Superv isor Passw ord
Set User Passw ord
Sav e & Ex it Setup
Ex it Without Sav ing
higf:Select Item
F10:Sav e & Ex it Setup