Table of Contents
Advertisement
1 – Introduction
Laser Safety Information
1.8
Laser Safety Information
This product may use Class 1 laser optical transceivers to communicate over the
fiber optic conductors. The U.S. Department of Health and Human Services
(DHHS) does not consider Class 1 lasers to be hazardous. The International
Electrotechnical Commission (IEC) 825 Laser Safety Standard requires labeling in
English, German, Finnish, and French stating that the product uses Class 1
lasers. Because it is impractical to label the transceivers, the following label is
provided in this manual.
1.9
Electrostatic Discharge Sensitivity (ESDS) Precautions
The assemblies used in the switch chassis are ESD sensitive. Observe ESD
handling procedures when handling any assembly used in the switch chassis.
1.10
Accessible Parts
The Field Replaceable Units (FRUs) in the SANbox2-8c switch are the following:
Small Form-Factor Pluggable (SFP) optical transceivers
1.11
Pièces Accessibles
Les pièces remplaçables, Field Replaceable Units (FRU), du commutateur
SANbox2-8c Fibre Channel Switch sont les suivantes:
Interfaces aux media d'interconnexion appelés SFP transceivers.
1.12
Zugängliche Teile
Nur die folgenden Teile im SANbox2-8c Fibre Channel Switch können
kundenseitig ersetzt werden:
Schnittstellen für die Zwischenverbindungsträger, SFP transceivers
genannt.
1-8
0
59042-08 A
Advertisement
Table of Contents
