Laser Safety Information; Electrostatic Discharge Sensitivity (Esds) Precautions; Accessible Parts - Qlogic 5800V Series Installation Manual

Preface

Laser Safety Information

Laser Safety Information
This product uses Class 1 laser optical transceivers to communicate over the fiber
optic conductors. The U.S. Department of Health and Human Services (DHHS)
does not consider Class 1 lasers to be hazardous. The International
Electrotechnical Commission (IEC) 825 Laser Safety Standard requires labeling in
English, German, Finnish, and French stating that the product uses Class 1
lasers. Because it is impractical to label the transceivers, the following label is
provided in this manual.
The following warning applies to XPAK optical transceivers:
WARNING!!
LASER RADIATION
DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS
CLASS 1M LASER PRODUCT
Electrostatic Discharge Sensitivity (ESDS)
Precautions
The assemblies used in the switch chassis are ESD sensitive. Observe ESD
handling procedures when handling any assembly used in the switch chassis.

Accessible Parts

The Field Replaceable Units (FRUs) for the QLogic 5800V Series switch are the
following:

Power supplies

Small Form-Factor Pluggable (SFP) optical transceivers

XPAK optical transceivers
xiv 59265-02 B