Qt5116 - Q-See QT SERIES User Manual

QT5116

FRONT PANEL
1 2
ITEM NAME FUNCTION
1 POWER ( Puts the DVR into standby mode or wakes it up from
Behind flip-down
standby mode.
panel)
2 USB PORT Used for external USB backup devices.
(
Behind flip-down panel)
3 NUMBER PAD Enter channel numbers.
4 MENU Opens the Main Menu
5 BACKUP Opens Backup Menu
6 DIRECTION Navigates through selections in menus
7 Begins manually recording on all channels
RECORD
Enters Search Mode
8 SEARCH
Shows status of the DVR Functions and the Hard
9 INDICATOR LIGHTS
Drive
Change between 1, 4, 8 and 16-screen viewing mode
10 VIEWING MODE
Input channels numbers above 10 by pushing this
11 10+ BUTTON
button followed by the second digit.
Enter PTZ mode in live view
12 PTZ
Turn audio on or off in live view if audio input devices
13 AUDIO
are attached.
Displays system information
14 INFO
Confirms selection in menus or input in fields
15 ENTER
16 PLAYBACK CONTROLS REW - Rewind
PLAY - Opens the Playback interface. Pauses or
resumes playback
FF - Fast Forward
STOP - Quits Playback mode
CONTROL KNOB Outer ring navigates through menus
17
Inner knob increases or decreases speed of fast
forward or rewind.
34
3 4 5 6 7 8
10 11 12 13 14 15 16 17
Also switches video output mode.
BACK PANEL
1
9
6 7 8 9 10 11
16
ITEM NAME
1 HDMI
2 AUDIO OUT
3 AUDIO IN
4
eSATA
5 FAN
6 PTZ
7 K/B
8 ALARM IN
9 LAN
10 USB PORT
11 VGA PORT
12 VIDEO OUT
13
SPOT OUT
14 VIDEO IN
15 POWER SOCKET
16 POWER SWITCH
2 3
12 13 14
FUNCTION
HDMI video output
Audio output for amplified speaker
16 channels of audio input
Connection for external eSATA hard drive for backup
Cooling fan exhaust port. This should not be blocked.
Connections for Pan-Tilt-Zoom speed dome cameras.
Y = "+" Z = "-"
Connector for a PTZ keyboard
Connect up to 16 external sensors
Network (ethernet) port
For the USB mouse
VGA output for 19" or larger monitor
BNC connector for TV or monitor
Connect to another monitor as an auxiliary output
channel. This monitor will only display video and will
have no menu access.
BNC connectors for up to 16 cameras
Attachment point for power cord
Use to turn on the DVR as well as to turn off after
powering down from within the GUI
4 5
15 16
35