Q-See QSNDVR8/16R User's Manual And Installation page 10

5. Close the top cover of the drawer
the hard drive drawer back into the DVR.
(Make sure the cables are firmly pressed onto
the HDD interface
If you have another HDD, set the jumper on that HDD to SLAVE, open the DVR cover, put the
HDD to a second HDD shelf, and then connect the power and ribbon cable.
Option 2: If the DVR comes with a CD-RW, please follow the steps outlined below:
Open the DVR cover, fix the HDD to the DVR HDD plate that supports the HDD, then connect the
power and ribbon cable. When installing a second HDD, set the jumper on the first one to MASTER and
the jumper on the second HDD to SLAVE; put that HDD on the other HDD shelf. Connect the power
and ribbon cable. The process is similar as that for Option 1.
8/16 Channel Digital Video Recorder
and
)
put 6. Lock the hard disk drawer by turning the
key clockwise.
9