Bass; Treble; Balance; Audio - Zenith SYSTEM 3 SR3273DT Operating Manual & Warranty

AUDIO MENU
AUDIO MENU
BASS I
TREBLE I
BALANCE L I
AUDIO STEREO
SEQ ON
+
+
R
AUDIO MENU
BASS I
TREBLE I
BALANCE L I
SEQ ON
+
+
R
While Video I or Video 2 Source is Chosen
MENU OPERATION
@ Press MENU repeatedly until the
AUDIO MENU is shown.
ADJUST
Press ADJUST Left/Right to
adjust to the desired option.
SELECT
Press SELECT Up/Down
until the desired option is either
highlighted or selected.
( E.TE. )
Press ENTER or wait a few
seconds for the TV to return to
normal operation.
BASS
TREBLE
BALANCE
AUDIO
(AUDIO options are not
available while a video
source is chosen. The audio
signal being received from
a video source is assumed
to be stereo. )
SEQ
(Spatial Equalization)
Adjusts the BASS (low-frequency) level.
Adjusts the TREBLE (high-frequency) level.
Adjusts the balance of sound between the two speakers.
Allows you to select STEREO, MONO or 2ND AUDIO/SAP speaker operation. See information
below this chart for more details.
STEREO: Directs the sound to the Left and Right speakers as supplied by the program
source (broadcast TV, VCR, etc.)
MONO: Directs the same sound to both Left and Right speakers, even if the program
being received is in stereo.
2ND AUDIO/SAP: Directs the sound for the Second Audio Program (second language) to both
the Left and Right speakers. SAP sound is always monaural.
Produces a spacious and more tonal sound. SEQ is only available while a stereo signal is being
received and processed by the TV.
I
CH 2
10:56
STEREO
Audio Mode Shown in
Channel/Time Display
STEREO is selected and a
stereo signal is being received.
You will hear stereo sound.
TO USE AUDIO OPTIONS
We recommend that you use the STEREO option. The TV
switches automatically between the STEREO and MONO
modes depending on the signal being received.
If you prefer SAP, use the 2ND AUDIO/SAP option. On those
stations which broadcast two audio portions, you hear the SAP
(usually a second language). When the SAP broadcast ends,
the TV switches automatically between STEREO and MONO
modes. The TV switches back to 2ND AUDIO/SAP when the
SAP broadcast resumes.
NOTE:
• All adjustments on the AUDIO MENU are optional. You
do not have to use these features in order to use your TV.
2916-0
8 -- 1