Table of Contents
Advertisement
! •
I
TROUBLESHOOTING
Before calling for service, try these simple solutions to resolve difficulties with VCR Plus+.Opei'atiofis
Problem
JPossible Solution
Operating
Problems
Remote does not respond to key presses, display does not
Are batteries installed? Remove batteries for a minimum of 30
change,
seconds to clear remote's memory_ Reinst_dl batteries and
reprogram your equipment'.s brand codes: ff_necessary.
Remote displays "ERR SETUP."
Enter brand codes first before using VCR, CABLE, or AUX
"
modes.
Recording Problems
VCR records a channel other than the one specified.
Channel Mapping was not g,_rformed or is incorrect.
VCR recording stops before end of sporting event.
Specify additional time'usirg ADD TIME when programming
,
to record sporting events to adequately extend recording time.
Remor,e does not operate equipment.
Be sure proper brand code was used. Try a different code.
Check Special Features section to see if a special code will
solve problem.
Cable Box does not turn On when recording begins.
Do not turn cable box off. C,able box must be left on prior to
VCR Plus+ recording.
VCR shuts Off when recording is scheduled to begin.
VCR mus! be turned off pri_r to VCR Plus+ recording.
Channel Mapping Problems
Cannot display default channel mapping numbers.
Remote will only display changes made to default GUIDE CH
numbers.
Programming Problems
Cannot enter Brand CodeS while remote is in Record mode.
Remote displays "CLASH."
It is not possible to use Me PRG key while remote is in Record
mode. Wait until current rex:ording is complete before
programming any new brand codes.
"
Another program is already scheduled for l_at time slot or
portion thereof.
Advertisement
Table of Contents
