Setup Menu; Auto Program; Ch. (Channel) Add/Del - Zenith SENTRY 2 SMS1943S Operating Manual & Warranty

SETUP MENU
To Access SETUP MENU
Refer to the "Quick Reference to On-
Screen Menus" section for details.
Before Using SETUP MENU
Connect and turn ON all external equip-
ment, such as cable TV decoder, VCR,
etc. before using any item on the SETUP
MENU.
SETUP MENU
-> AUTO PROGRAM
CH. ADD/DEL
TUNING BAND
AUTO TUNING
CLOCKSET
CAPTIONS
AUDIO
START
SETUP MENU
SETUP MENU
CLOCK SET
CAPTIONS
SETUP MENU While
AUX Channel is Chosen
AUTO PROGRAM
Purpose
Finds all available channels and stores them in the memory of
the TV for access by CHANNEL (CH) Up/Down.
Use AUTO PROGRAM only when you first install your TV,
or when you permanently change the connections to the TV.
For example, when you replace the antenna with a cable-TV
system.
To Use AUTO PROGRAM
Press ADJUST (ADJ) Left!Right to start AUTO PROGRAM.
SETUP MENU'
-> AUTO PROGRAM
CH. ADD/DEL
TUNING BAND
AUTO TUNING
CLOCK SET
CAPTIONS
AUDIO
START
f ---.,
AUTO PROGRAM HAS COMPLETED
TUNING BAND IS
_ CHANNELS FOUND
Status When Search is Complete
When Some Channels Are Not Found
AUTO PROGRAM finds only active channelsand stores
them in the favorite channelmemory. You can addchannelsto
thosestoredin memory by usingthe CH. ADD/DEL option.
Selecting Auto Program
CH. (Channel) ADD/DEL
Purpose
Lets you add channels to and remove channels from the active
channels found when using the AUTO PROGRAM option. In
this way you can customize the channels that are accessed
through CHANNEL (CH) Up/Down.
To Add a Channel to Scan Sequence
1. Use numbered buttons to select the channel you wish
to add.
2. Add channel by pressing ADJUST (ADJ) Left/Right
until the display shows ADD.
To Delete a Channel from Scan Sequence
I. Use numbered buttons to select the channel you wish
to delete.
2. Delete channel by pressing ADJUST (ADJ)
Left/Right until the display shows DEL.
SETUP MENU'
AUTO PROGRAM
"> CH. ADD/DEL
TUNING BAND
AUTO TUNING
CLOCK SET
CAPTIONS
AUDIO
CH 13 ADD
Selecting Ch. Add/Del
7J1
2733-0