Yard-Man E445 Operator's Manual page 6

NOTE: Standbehind
themower a sifyou
i weregoingto operate
it. Your right hand cot-
' respondsto the right
side of the mower; your
left hand corresponds
to the left side of the
mower.
i
, IMPORTANT
i DO NOTcrimp the
cables when lifting the
handle up.
IMPORTANT
This unit is shipped
without gasoline or
oil in the engine. Fill
up gasolineand oil
as instructed in the
accompanying engine
manual BEF(JRE
operating your mower.
Step 1
Hardware Pack
Carriage B olts (2)
1. Removeanypackingmaterialwhich may be between
upperand lowerhandles.
a. Pull up and backon upperhandleas shownin
Step 1.Makecertainthe lowerhandleis seated
securelyintothe handle mountingbrackets.
b. Tightenstar knobssecuringupperhandleto
lowerhandle.Make surethat eachcarriagebolt is
seatedproperlyin the handle.
2. Locatehairpinclip in one holeon the weldpin on each
sideof lowerhandle.
.
a. Removehairpinclipfrom this hole.Usinga pair of
pliers,insert hairpinclip intothe other holeon the
weldpin. Repeaton otherside.
b. Inserta carriagebolt fromthe hardwarepack into
the upperhole on the handle mountingbracket.
Securewith one plasticwing nut,also included
in the hardwarepack.Repeaton other sidewith
remainingitemsfrom hardwarepack.
The ropeguide is attachedto the right sideof the
lowerhandle.Loosenthe wing nutwhich securesthe
rope guide.
a. Holdthe blade controlagainstupperhandle.
b. Pull starterropeout of the engine.Releasethe
bladecontrol.
c. Slip starterrope into ropeguide.Tightenwingnut.
4. Insertpost on cable ties intoholes providedon the
lowerhandle.Pull cabletie tight and trim excess.
Step 2
Step 3 Step 4
6