FujiFilm Finepix F100fd Basic Manual page 49

Hide thumbs Also See for Finepix F100fd:
Table of Contents

Advertisement

T310GB.book Page 49 Wednesday, January 23, 2008 3:48 AM
Input/Output Terminal
A/V OUT (Audio/Visual
NTSC/PAL-type (with monaural sound)
output)
Digital input/output
USB 2.0 High-Speed, PTP (Picture Transfer Protocol)/MTP (Media Transfer Protocol)
Power Supply and Others
Power supply
Rechargeable Battery NP-50, DC coupler CP-50 (sold separately), AC power adapter AC-5VX (sold
separately)
Guide to the number of
available frames for battery
operation
According to the CIPA (Camera & Imaging Products Association) standard procedure for measuring
digital still camera battery consumption (extract):
When using a battery, use the battery supplied with the camera. The storage media should be xD-Picture
Card.
Pictures should be taken at a temperature of +23°C (+73°F), with the LCD monitor turned on, the optical
zoom moved from full wide-angle to full telephoto (or vice-versa) and back again to its original position
every 30 seconds, the flash used at full power every second shot and the camera turned off and then on
again once every 10 shots.
• Note: Because the number of available shots varies depending on the level of charge in the battery, the
Camera dimensions (W/H/D) 97.7 mm × 58.9 mm × 23.4 mm/3.8 in. × 2.3 in. × 0.9 in. (Depth is the minimum value.) (not including
accessories and attachments)
Camera mass (weight)
Approx. 170 g/6.0 oz. (not including accessories, battery and Memory Card)
Weight for photography
Approx. 190 g/6.7 oz. (including battery and Memory Card)
Temperature: 0°C to +40°C (+32°F to +104°F)
Operating Conditions
80% humidity or less (no condensation)
Battery Type
NP-50 (1000 mAh)
figures shown here for the number of available shots using the battery is not guaranteed.
The number of available shots will also decline at low temperatures.
Number of frames
Approx. 230 frames
49

Advertisement

Table of Contents
loading

Table of Contents