Table of Contents
Advertisement
T310GB.book Page 23 Wednesday, January 23, 2008 3:48 AM
Auto power off function
When the Auto power off function is active, if the camera
is left unused for 2 or 5 minutes, this function turns the
camera off. To turn the camera back on, press ON/OFF.
To play back images, hold down w for about 1 second.
MEMO
When [POWER MANAGEMENT] is set to [
AF] or [
CLEAR DISPLAY], [AUTO POWER OFF]
cannot be cancelled.
Checking the battery charge
Turn the camera on and check the battery level indicator
on the LCD monitor.
QUICK
A There is ample battery charge. (Lit white)
B The battery is almost half charged. (Lit white)
C There is insufficient charge left in the battery. The
battery will soon run out. Have a charged battery
ready. (Lit red)
D The battery is depleted. The display will shortly go
blank and the camera will stop working. Replace the
battery. (Blinking red)
CAUTION
• Due to the nature of the battery, the battery level
indicator (
when the camera is used in cold locations. Try warming
the battery in your pocket or a similar location before
use.
• Battery with no remaining charge (V blinking red)
may cause camera faults such as the camera turning
itself off without retracting the lens. Always load a fully
charged battery.
• Depending on the camera mode, the transition from
to V may occur more quickly.
, or V) may appear early
,
23
Advertisement
Table of Contents
