Basic Movie Recording And Playback Recording High-Defi Nition (Hd) Movies - FujiFilm X100S Owner's Manual

Basic Movie Recording and Playback Basic Movie Recording and Playback
Recording High-Defi nition (HD) Movies Recording High-Defi nition (HD) Movies
The camera can be used to record short high-defi nition movies. Sound is recorded in stereo via the
built-in microphone; during recording, do not cover the microphone or use the viewfi nder selector,
which is located next to the microphone.
1
Set aperture to A.
2
Press the DRIVE button to display drive options.
Press the command dial up or down to high-
light F (MOVIE) and press MENU/OK.
3
Press the shutter button all
the way down to start re-
cording.
4
Press the shutter button all
the way down again to end
recording. Recording ends
automatically
memory is full.
32
MOVIE
or when
R Focus, exposure, and white balance are adjusted
automatically throughout recording. The color and
brightness of the image may vary from those dis-
played before recording begins.
R The indicator lamp lights while movies are being
recorded.
Q The microphone may pick up lens noise and other
sounds made by the camera during recording.
Q Vertical or horizontal streaks may appear in movies
containing very bright subjects. This is normal and
does not indicate a malfunction.
Q If the optical viewfi nder is on, the camera will auto-
matically switch to the electronic viewfi nder.
The Q Button The Q Button
The Q button can be used to view and adjust camera
settings (P 34).