Power Supply; Rear Panel Connectors - Foxconn 755FXK8AA series User Manual

Power Supply

This motherboard uses an ATX power supply. In order to avoid damaging any
devices, make sure that they have been installed properly prior to connecting
the power supply.
ATX Power Connector: PWR1
PWR1 is the ATX power supply connector.
Make sure that the power supply cable
and pins are properly aligned with the
connector on the motherboard. Firmly
plug the power supply cable into the con-
nector and make sure it is secure.
ATX 12V Power Connector: PWR2
The 4 pin ATX 12V power supply connects
to PWR2 and provides power to the CPU.
Attention:
You have to press the power button for more than four seconds if
you change the default Instant-off setting to "Delay 4 Sec" for the
"Soft-Off by Power Button" option in the BIOS Power Management
Setup.

Rear Panel Connectors

This motherboard provides the following ports as below:
For -6 models
1
PS/2 Mouse Port
2 PS/2 Keyboard Port
12
Chapter 2 Installation Instructions
4 Parallel Port
(Printer Port)
3 COM1 5 Coaxial 6 1394 Port
S/PDIF (optional)
out port
(optional)
12
ATX 20-pin Power Connector
5V GND GND
5V GND PS-ON -12V
20
10
12V PWR-OK 5V
5V
5VSB GND GND
ATX 12V Power Connector
G N D
12V
8 LAN Port (-L/-K)
(optional)
7
USB 2.0 Ports
2005-2-3, 14:33
GND 3.3V
11
1
3.3V
GND 3.3V
GND
12V
Line-in
Line-out
9
Microphone