Before Setting The Controls; Setting The Controls - Whirlpool RBD277PDB4 Use And Care Manual

ill==¸¸
Before setting the controls
• Make sure clock is set to correct
time of day. (See "Setting the
clock" on page 9.)
,,Make sure the oven door is
completely closed.
Setting the controls
NOTE: These examples are for double
upper ovens only. Other ovens may look
slightly different.
NOTE: On double ovens, you cannot run
a Self-Cleaning cycle in both ovens at the
same time. Also, if you are setting a Self-
Cleaning cycle for the lower oven the control
will not let you program any other function in
the upper oven.
To start cleaning immediately:
1. Press Auto Clean pad.
A 31½-hour Self-Cleaning cycle will beset
automatically.
PRESS
to select
oven (for
double
ovens)
YOU SEE
PRESS
2. Set cleaning time (optional). PRESS
If you want a Self-Cleaning cycle longer
or shorter than 3½ hours, use the Hour
W
pad to set the desired cleaning time.
Press the "up" (A) or "down" (V) pad(s)
until a time between 2½-41½ hours shows
on the display.
• Use 21½hours for light soil.
• Use 31½-41½ hours for moderate to
heavy soil.
YOU SEE
(example for 41/2-hour cycle)
continued on next page
37